Are you searching a high-end air compressor backed up with a high-power motor? Then the Makita Air Compressor MAC2400 Big Bore 2.5 HP model rightfully deserves your attention. The reputed brand Makita has produced a series of compressor models. And the heavy-duty MAC2400 is a great one offering a range of premium features. Go through the following review to get a clear idea about t it’s key features, pros and cons.
Key Features of Makita Air Compressor MAC2400 Big Bore:
Heavy Duty but Portable:
Reviewing range of air compressor models, we can say that the heavy-duty units hardly come in lightweight bodies. However, there are lots of lightweight air compressor models available in the market. But those units also bear some drawbacks. For instance, the lightweight construction may cause shaking which is not expected for perfection.
Though the Makita Mac 2400 weighs about 81 pounds, you can easily carry it to different job site using the roll bar handle. You can also use a dolly to carry the compressor to any place. If you still think that the weight is too high for a compressor, go for the lighter models. But remember, the Makita Big Bore MAC2400 air compressor is especially designed for the heavy-duty operations. So, if you wanna do different types of finishing jobs using compressor, go for it.
The main fact about an air compressor is the power source of it. Because the performance of the compressor greatly depends on it. The Makita Air Compressor MAC2400 is able to give the best performance with 15 amp/110-115-volt circuit. That means any circuit which usually used at home can run the compressor without any hassle. When the user starts the compressor it may take 13 amp but after a few minutes, it may peak at up to 15 amp. The low AMP of the compressor draw reduces incidences of tripped breakers at start-up.
Tank size of the air compressor is large enough for most of the works. The total capacity of the tank is 4.2 gallons. Before thinking about the tank size, you should know what the actual fact about the tank of an air compressor. If you want to do tire inflation, airbrushing or you want to use the compressor with high CFM tools, then the tank size should be big. But for most of the small projects, a 4.2 gallon is enough. There are two mini tanks in this Makita air compressor Mac2400. They are linked together behind the roll cage of the compressor.
BIG Bore Pump:
What makes the Makita MAC2400 model exclusive from the average grade compressor is it’s Big Bore pump. Under this mechanism the pump is equipped with sturdy cylinder and piston built with cast iron material. This heavy-duty construction enables the pump to run the bore and stroke process with superb efficiency featuring increased compression, and fast recovery without generating much noise. The big advantage of adding cast iron built cylinder is that it’s engineering assures better durability with high-end performance even under heavy-duty job-site conditions.
Oil Lubricated Pump – Easy to Maintain:
The MAC2400 air compressor comes with oil-lubricated pump. It also bears a big-size filter featuring automotive style. It facilitates the machine in an increased level of air intake with higher capacity.
However, you may think that the oil lubricated pumps require greater maintenance then the oil-free ones. It is true, but in return this type pump offers some great advantages.
- Less Wear: Oil lubrication minimizes the wear of the machine. So, this features makes the compressor cost effective in the long run.
- Cooler Pump: Another great advantage of the Big Bore engineered oil-lubricated pump is that it limits the RPM level at 1720, which is quite low considering it’s heavy structure. This process keeps the MAC2400 compressor cooler – comparing to it’s alternative models – resulting in longer motor as well as pump life.
Like the other air compressors, it needs to bleed air tanks after use. The oil sight glass indicates how long the machine would operate. If you want the better performance from the compressor, you should use a good quality oil. Otherwise, it needs less maintenance.
Great Design & Easy Access:
The Makita Air Compressor MAC2400 is equipped with some advanced design additions, such as, convenient oil drain, lever handle ball valve and tank drain valve. It is also provided with finned discharge tubing. This design hack contributes to dissipate the heat in a faster way with an improved level of efficiency. It won’t be overwhelming to say that the clever design mechanism applied in the Makita MAC2400 model has improved the standard petcock design.
The oil sight glass helps the user to maintain the machine more efficiently. Another design hack is that the roll cage offers protection to the unit. How? well, it helps the machine withstanding the tough job-site ambient.
Powerful Motor – Reliable Operation:
Thanks to manufacturer for combining advanced engineering mechanism with intelligent design in the Makita MAC2400 model. The powerful 2.5 HP 4-Pole motor of the compressor produces 4.2 CFM at 90 PSI. Large automotive category industrial air filter increase the level of air intake with greater efficiency. This machine draws low AMP power which minimizes the situations, like breaker tripping, voltage fluctuation, etc. These kind of mishaps often lead towards premature motor failures. Thanks to the manufacturer to equip the machine with a Built-in thermal overload that assures improved motor protection.
However, if you are planning to use the compressor in the winter, keep in mind that it may cause some issues in an extremely cold weather. But it can perform very well in the inside of a garage or workshop.
If you ask me why you should by the air compressor, I will tell the performance of the compressor. You can use the compressor for most of the heavy duties. Users who have bought the air compressor is using it for DIY, automotive, non-intensive professional use and some other professional works. Some tools which users can use with the compressor are brand nailer, Impact wrench, grease gun, plasma cutter etc. That means this Makita Air Compressor MAC2400 has the ability to do verities of work. This kit comes with compressor Oil and 1/4-inch universal quick coupler.
The Makita MAC 2400 air compressor makes 79 dB of noise when the compressor is running. Though the noise level of the compressor is comparatively a little bit higher than the other model, but if you think about a heavy duty air compressor this level is acceptable.
You May Also Like a Video Review on Makita MAC2400 Big Bore 2.5 HP Air Compressor
|Tank Capacity:||4.2 gallons. “Twin Stacked”.|
|Performance Level:||@90 PSI: 4.2 cfm|
@40 PSI: 4.8 cfm
|Maximum Pressure Level:||0 – 130 PSI|
|Power Supply Requirement:||12.3 AMPS|
|Noise Level:||79 dB|
|Size Dimensions:||19-3/8 x 18-3/4 x 18 Inches|
|Net Weight:||77 lbs.|
- This Makita air compressor has high CFM rating.
- Designed with a roll cage for the protection of the compressor.
- The cylinder of the compressor is made of cast iron which increases the pump life.
- Two hose outlet helps the user to use it with more flexibility.
- This compressor runs the operations with less noise.
- Oil lubricated motor for durability and cooler running.
- Industrial air filter for greater efficiency.
- Able to do most of the heavy duties.
- Warranty is available in the product.
- The weight of the compressor is too high and sometimes make problem to carry the compressor.
- Some external kits may not be able to perform perfectly with the compressor.
- Tank capacity is not so high like some other models of Makita.
Makita air compressors are quite popular among the customers of air compressors. Especially this Makita Air Compressor MAC2400 model has got huge popularity because of its price and features. The best thing you will love about the product is, it is a commercial grade air compressor. This product has built with great quality which makes sure the durability of the compressor. If you really want to do different types of airing jobs, you should order the Makita MAC2400 Big Bore 2.5 HP Air Compressor.