A portable car jump starter is a must-have device these days that can help you on the road in case of a dead battery with nobody around to help you. A powerful jump starter like Anker PowerCore Jump Starter 600 can save you from hard times both on and off the road. This is 600 Amp peak jump starter is a handy tool for the vehicle owners. If you have it in your vehicle, you don’t have to worry about a dead battery anymore. Besides, its flashlight and USB charging ports can help you in several ways beyond imagination. Let’s see the main features, advantages and limitations of this portable car jumper cum charger unit.
Main Features of Anker PowerCore Jump Starter:
Anker PowerCore Jump Starter 600 model has excelled the other car jumper models produced by the renowned brands as well as it’s own manufacturer. Here are some of the major features of Anker PowerCore Jump Starter 600 model that will show you why it is the perfect tool for you.
Efficient Jump Starter:
It can help you jumpstart your car without seeking help from someone else. You can handle a dead car battery single-handedly with extreme ease. It is a powerful 15,000mAh device that can jumpstart your vehicle’s engine 20 times on a single charge. It’s jumpstarting current starts from 300 amperage and ranges up to 600 amp peak jump starting power. This small but powerful jump starter device can work with a variety of vehicles, including, motorcycles, cars, boats, snowmobiles, etc. It can boost up any type diesel engine up to 3.0 liter and gasoline engine up to 5.0 liter capacity. It will work efficiently if the temperature doesn’t fall below -4 degrees or goes past 130 degrees Fahrenheit. Moreover, it’s heavy duty cables and clamps won’t disappoint you on the moment of necessity.
Using Anker PowerCore is super-easy. There aren’t any hard and fast rules. The best thing is that it is a secure device. Though jumpstarting a car is easy but in case, if you end up setting it up incorrectly, the alarm will notify you. When you have to jump start a ride, simply pull out the Anker PowerCore and connect cables in the 12-volt port. Make sure that the battery is at least 50% (which is indicated on the LCD). Connect black clamp to the negative and red to the positive terminal. Start the ride when the indicator light turns green. To know more details, you can check the Anker PowerCore Jump Starter 600 instruction manual.
This Anker PowerCore jump starter features 15000mAh capacity along with adaptive PowerIQ recharging mechanism, which makes it an exceptionally better charger than its counterparts. So, you can use this versatile device not only to jumpstart a car, but also to charge electronic devices such as phones, tablets, laptops and others. It has two USB ports (2.1 Amp each) providing 4.2 amps in total that come in handy when you have to charge a device on the emergency basis. With its single charge, you can use it multiple times for jump starting your vehicle and for charging devices. Recharges in just 5.5 hours using the included wall or car charger.
While choosing jump starter device, many people don’t consider the flashlight an important feature, but we do. Why? just imagine you have to jump start your vehicle in the dark with no one around to give you a helping hand. A flashlight can help you with so many things that you have no idea of. The Anker PowerCore model’s built-in flashlight can really be a life-saver tool, when you are stuck on roadside with a dead car during evening/night time. You can use this built-in flashlight, if there is no other light source available. This flashlight offers several modes, including ultra-bright mode, strobe mode and SOS mode. You can choose any of these modes upon requirement.
You May Also Like: Best Jump Starter Reviews 2016.
Smart Safety options:
Anker PowerCore Jump Starter 600A Peak Current Car Battery Jump Starter and 15000mAh Portable Charger includes a bunch of well-design safety features. It offers safety both for the vehicle and the unit itself. for vehicle-side it’s system offers safety mechanism to prevent short circuit, power surge and reverse polarity. Beside these, it features safety mechanism for the unit, including faulty set-up alarm as well as overcharge protection.
Portable and Compact:
It is a tiny jump starter weighing only 2.5 pounds which can be carried easily. Moreover, it flexible dimensions – 9.4 x 4.9 x 3.9 (inch) – have made it easy to store. You can put it in your car-trunk or side-wall pockets. You can also put it in the car glove box. Some people love to store it in their laptop bags which they carry with wherever they go, so the jump starter stays with them all the time.
You May Also Check This Review about Anker PowerCore Jump Starter 600 (High 600A Peak Current Car Battery Jump Starter and 15000mAh Portable Charger with Built-in Flashlight and Safety Protection) Perfect for 5L Gas and 3L Diesel Engines.
- Product Weight: 2 pounds.
- Product Dimensions: 9.4 x 4.9 x 3.9 (inch).
- Peak Jump Starting Current: 600 amperage.
- Recharging Period: 5.5 hours.
- Charger Capacity: 15000mAh capacity.
- Adaptive PowerIQ Recharging Technology.
- Built-in Led Flashlight w/ 3 modes: ultra-bright mode, strobe mode & SOS mode.
- Premium Standard Battery Cells.
- Reverse Polarity Protection.
- Faulty Set Up Alarm.
- Short-circuit Protection.
- Overcharging Protection.
What Comes with Anker PowerCore Jump Starter 600 Kit?
- Anker PowerCore Jump Starter 600.
- Jumper cables.
- 15V wall charger.
- 15V car charger.
- 18-month warranty.
- Lightweight, portable Jump Starter.
- Jump-starting Current Ranges from 300 amp to 600 peak amp.
- A powerful device that can jump start any vehicle ranging from a car to a boat to a bike.
- It can jump start a 5L gas engine and or 3L diesel engine twenty times on a single charge.
- With its fast charging technology, known as PowerIQ, your phone and other devices are charged at full speed.
- Advanced safety protection ensures the safety of your vehicle.
- It comes with 18 months manufacturer warranty.
- Manufactured by Reputed US Brand.
- Available under an Affordable Price Range.
- Anker PowerCore doesn’t work in too hot or too cold weathers. If the temperature falls below -4 degrees Fahrenheit or goes past 130 degrees, it won’t work.
- It has no built-in air compressor.
- It needs at least 25% charge for jump starting a vehicle.
- Jumper Cables are not much long.
Anker PowerCore Jump Starter 600 is a really helpful portable jump starter and a USB charging device. If you travel a lot in your car, it is a must-have tool that can help you with so many things on your tours. It is a feature-rich device that is powerful, portable, easy-to-use, easy-to-carry, has a flashlight, LCD, is lightweight, and is safe. Above all, your purchase is backed by 18 months warranty. Don’t wait for the things to turn against you rather be proactive – grab it today.